doc:appunti:hardware:dlink_dva_5593z
This is an old revision of the document!
Modem Router D-Link DVA‑5593Z
How to configure a port forward from the command line
Enter the command line using telnet with the admin account.
Here we define a port-forward rule named my-ssh which will redirect the external TCP/59722 port of the router to the internal host 192.168.1.3, TCP/22 port:
DLINK# configure DLINK(cfg)# nat DLINK(cfg-nat)# add portmapping my-ssh DLINK(cfg-nat)# portmapping my-ssh DLINK(cfg-nat-portmap:ssh-IPBOX)# extPortList add TCP:59722 DLINK(cfg-nat-portmap:ssh-IPBOX)# host 192.168.1.3 DLINK(cfg-nat-portmap:ssh-IPBOX)# intPort 22 DLINK(cfg-nat-portmap:ssh-IPBOX)# allInterfaces enable DLINK(cfg-nat-portmap:ssh-IPBOX)# enable DLINK(cfg-nat-portmap:ssh-IPBOX)# show DLINK(cfg-nat-portmap:ssh-IPBOX)# configSave
doc/appunti/hardware/dlink_dva_5593z.1621493586.txt.gz · Last modified: 2021/05/20 08:53 by niccolo