Differences

This shows you the differences between two versions of the page.

--- doc:appunti:linux:video:flowblade_howto [2026/03/26 23:05] – [Monitor] niccolo
+++ doc:appunti:linux:video:flowblade_howto [2026/03/26 23:40] (current) – [The Timeline] niccolo
@@ Line 1: / Line 1: @@
 ====== Flowblade HowTo ======
-===== Monitor =====
+===== The Monitor Panel =====
 In the default view, the top-right part of the windows is the **Monitor** panel. The monitor is used to view the working sequence in the **timeline** or the **clip** choosen from the **Media** panel. Two buttons are provided to switch from **Display Timeline** to **Clip** mode:
@@ Line 7: / Line 7: @@
 {{.:flowblade:flowblade-timeline-clip-monitor.png?direct&280|Display Timeline / Clip to Monitor}}
+=== The keys in Monitor Panel ===
+^ Left / Right              | Rewind / fast-forward by 1 frame     |
+^ Shift+Left / Shift+Right  | Rewind / fast-forward by 10 frames   |
+^ I / O                     | Mark In and Out points for clip cut  |
+^ Alt+I / Alt+O             | Go to In or Out point                |
+^ U                         | Insert the clip cutout at the end of the timeline  |
+^ Y                         | Insert the clip cutout in the timeline before the clip under the playhead  |
+^ T                         | Replace the clip selected in the timeline with the clip cutout from the Monitor. The cutout must be larger than the clip to be replaced.  |
+===== The Timeline =====
+=== The keys in Timeline Panel ===
+^ Left / Right              | Rewind / fast-forward by 1 frame     |
+^ Shift+Left / Shift+Right  | Rewind / fast-forward by 10 frames   |
+^ Mouse center-click        | Zoom fit                             |
+^ Mouse wheel               | Zoom timeline in / out               |
+^ Ctrl+Mouse wheel          | Pan timeline left / right            |
+^ X                         | Cut the clip at playhead             |
 ===== How to add clips with fade-in/fade-out effects on both video and audio =====