tecnica:motori:obd-ii
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
tecnica:motori:obd-ii [2018/08/02 07:03] – [Web Reference] niccolo | tecnica:motori:obd-ii [2018/08/04 07:22] – niccolo | ||
---|---|---|---|
Line 9: | Line 9: | ||
^ MIL/ | ^ MIL/ | ||
^ Freeze Frame | When the check engine light turn on, the ECU determines the error based on several engine operating conditions and stores it in what’s called a OBDII freeze frame. The data stored in Freeze Frame is usually recorded when a system fails the first time for two consecutive trip faults. Freeze Frame data will only be overwritten by a different fault with a higher priority. | ^ Freeze Frame | When the check engine light turn on, the ECU determines the error based on several engine operating conditions and stores it in what’s called a OBDII freeze frame. The data stored in Freeze Frame is usually recorded when a system fails the first time for two consecutive trip faults. Freeze Frame data will only be overwritten by a different fault with a higher priority. | ||
- | ^ Closed loop mode | | | + | ^ Fuel trim | Fuel trim is an adaptive strategy that adjusts fuel injector pulse width (open time) to adapt to wear, defects, or changes in the system. There is a short term fuel trim STFT and a long term fuel trim LTFT strategy. |
- | ^ Misfire | + | ^ Closed loop mode | In closed loop mode the vehicle is adjusting air/fuel mixtures based on the real time results it’s getting from the oxygen sensors. Engine stays in open loop for a few minutes, until oxygen sensor reaches its working temperature, |
+ | ^ Misfire | ||
+ | ^ Bank 1 and 2 | There are a number of OBD-II trouble codes that refer to either Bank 1 or Bank 2. Bank 1 refers to the side of the engine that has the #1 cylinder, Bank 2 is the opposite side of the engine. | ||
+ | ===== Toyota Yaris 2006 1.0 1KR-FE Engine | ||
+ | |||
+ | We tried the **iLC OBD2** adapter (WiFi version) along with the Android app **[[https:// | ||
+ | |||
+ | ==== OBD-II Available Sensors (PIDs) ==== | ||
+ | |||
+ | * Engine Coolant Temperature(°C) | ||
+ | * Intake Air Temperature(°C) | ||
+ | * Intake Manifold Pressure(kPa) | ||
+ | * Timing Advance(°) | ||
+ | * Fuel Trim Bank 1 Short Term(%) | ||
+ | * Fuel trim bank 1 sensor 1(%) | ||
+ | * O2 Volts Bank 1 sensor 1(V) | ||
+ | * O2 Volts Bank 1 sensor 2(V) | ||
+ | |||
+ | ==== OBD-II Unavailable Sensors (PIDs) ==== | ||
+ | |||
+ | * Fuel pressure(kPa) | ||
+ | * Fuel trim bank 1 sensor 2(%) | ||
+ | * Fuel trim bank 1 sensor 3(%) | ||
+ | * Fuel trim bank 1 sensor 4(%) | ||
+ | * Fuel trim bank 2 sensor 1(%) | ||
+ | * Mass Air Flow Rate(g/s) | ||
+ | * O2 Sensor1 Equivalence Ratio | ||
+ | * O2 Volts Bank 2 sensor 1(V) | ||
===== Web Reference ===== | ===== Web Reference ===== | ||
Line 16: | Line 44: | ||
* **[[https:// | * **[[https:// | ||
* **[[https:// | * **[[https:// | ||
+ | * **[[http:// | ||
+ | * **[[https:// | ||
* **[[http:// | * **[[http:// | ||
+ | * **[[http:// |
tecnica/motori/obd-ii.txt · Last modified: 2018/08/04 07:33 by niccolo