User Tools

Site Tools


tecnica:motori:honda_ntv650_wiring_diagram

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
tecnica:motori:honda_ntv650_wiring_diagram [2025/09/07 17:52] – [Connectors] niccolotecnica:motori:honda_ntv650_wiring_diagram [2025/09/30 22:58] (current) – [Connectors wiring colors] niccolo
Line 22: Line 22:
  
 The outer diameter refers to the overall cable, including the insulator. The AWG gauge is calculated measuring the diameter of the single strand and calculating the overall cross-sectional area; then the nearest value is looked into the [[wp>American_wire_gauge|AWG gauge table]]. The outer diameter refers to the overall cable, including the insulator. The AWG gauge is calculated measuring the diameter of the single strand and calculating the overall cross-sectional area; then the nearest value is looked into the [[wp>American_wire_gauge|AWG gauge table]].
 +
 +===== Insulating tape =====
 +
 +The main **wiring harness** is assembled using extensive **electrical tape**, both for the external wrapping and to insulate some internal connections. These are the characteristics of the tapes used:
 +
 +{{ .:honda_ntv650:honda-electrical-tape.jpg?320|Electrical tapes used by Honda}}
 +^  Color  ^  Width  ^  Thickness  ^
 +| Black    20 mm  |  0.10 mm |
 +| Blue    |  40 mm  |  0.20 mm |
 +
 +The black tape is very soft and flexible, unlike the ones commonly found on the market which have a thickness of 0.13 or even more.
  
 ===== Connectors ===== ===== Connectors =====
Line 36: Line 47:
 ^ 6040-9111  | Housing Female, 9P  | ^ 6040-9111  | Housing Female, 9P  |
 ^ 6030-9991  | Housing Male, 9P    | ^ 6030-9991  | Housing Male, 9P    |
-^ 1500-0071  | Male terminal 2.8 mm  | +^ 1500-0071  | Male terminal 2.8 mm, tinned brass  | 
-^ 8240-4050  | Female terminal 2.8 mm  |+^ 1800-2097  | Male terminal 2.8 mm, nickel-plated copper 
 +^ 8240-4092  | Female terminal 2.8 mm, tinned brass  | 
 +^ 8240-4050  | Female terminal 2.8 mm, nickel-plated copper  | 
 + 
 +Here you can download the **{{.:honda_ntv650:sumitomo-mtw-connectors.pdf|Sumitomo MTW series conntector catalog}}**. Beware of the **thickness** of the male terminal: it original is **0.5 mm**, whereas you can find many low quality replicas that are only 0.3 mm. 
 + 
  
 ===== Fuel pump connector polarity ===== ===== Fuel pump connector polarity =====
Line 48: Line 65:
  
 You will hear the noise from the working pump. Ance the carburetors are full, the pump will stop. You will hear the noise from the working pump. Ance the carburetors are full, the pump will stop.
 +
 +===== Connectors wires color =====
 +
 +{{.:honda_ntv650:ntv650-revere-connector-9p-mini-red.png?direct&360|NTV 650 Revere 9P Mini Red Connector}}
 +{{.:honda_ntv650:ntv650-revere-connector-9p-mini-white.png?direct&360|NTV 650 Revere 9P Mini White Connector}}
 +
 +{{.:honda_ntv650:ntv650-revere-fuse-box.png?direct&360|NTV 650 Revere Fuses Box}}
 +
  
tecnica/motori/honda_ntv650_wiring_diagram.1757260378.txt.gz · Last modified: by niccolo