Differences

This shows you the differences between two versions of the page.

--- doc:appunti:net:ipv6_on_ppp [2026/09/27 09:08] – [Using a static IPv6 address] niccolo
+++ doc:appunti:net:ipv6_on_ppp [2026/09/27 09:37] (current) – [Commands] niccolo
@@ Line 574: / Line 574: @@
 # Execute first the default Debian script (DNS, etc.), if it exists.
-[ -x /etc/wide-dhcpv6/dhcp6c-script ] && /etc/wide-dhcpv6/dhcp6c-script
+# We do not need this because the DNS is configured locally, not via DHCPv6.
+#[ -x /etc/wide-dhcpv6/dhcp6c-script ] && /etc/wide-dhcpv6/dhcp6c-script
 get_src() {
@@ Line 611: / Line 612: @@
 </file>
-The script we added calls the default Debian script before modifying the default route.
+If you need to call the default Debian hook script **/etc/wide-dhcpv6/dhcp6c-script** (used mainly to set the DNS nameserver on DHCPv6) you need to uncomment the relevant line in the scrtip above.
-===== Commands =====
+You can see all the times that the script is executed (because the DHCPv6 lease renews) using the command:
+<code>
+journalctl --boot -t dhcp6c-src
+</code>
+===== Useful commands =====
 Mostra la **rotta predefinita** per IPv6: