Differences

This shows you the differences between two versions of the page.

--- doc:appunti:linux:sa:if_rename [2021/05/13 16:50] – niccolo
+++ doc:appunti:linux:sa:if_rename [2024/04/12 18:01] (current) – [Debian 9 predictable network interface names] niccolo
@@ Line 1: / Line 1: @@
 ====== Renaming network interfaces ======
+===== With Debian 10 Buster =====
+How to rename a network interface from e.g. **enx00e04c885302** to something more human like **lan0**? The preferred method is to create a file **/etc/systemd/network/10-persistent-lan0.link** (one file for each interface to be renamed) with something like this:
+<file>
+#/etc/systemd/network/10-persistent-lan0.link
+[Match]
+MACAddress=00:e0:4c:88:53:02
+[Link]
+Name=lan0
+</file>
+**WARNING**: You cannot use this method to safely assign the default kernel names (''eth0'', ''eth1'', ...) in your preferred order; this is because if systemd tries to rename an interface using a name which is already assigned by the kernel (e.g. it tries to swap ''eth0'' and ''eth1''), it fails. So the target **Name** must not potentially conflict with the names assigned by the kernel.
+**WARNING**: This method has an additional problem if you need to create a **VLAN**. When the system creates e.g. the **lan.602**, its MAC address matches the systemd snippet, so systemd tries to assign to it the name (**lan0** in the example above) but the name already exists, so the interface remains with a temporary name e.g. **rename5**.
+A workaround can be the following: tell the kernel to use the old ''ethX'' schema (passing the **net.ifnames=0** option), then instruct systemd to act only on **%%eth*%%** network interfaces:
+<file>
+[Match]
+MACAddress=00:e0:4c:88:53:02
+OriginalName=eth*
+[Link]
+Name=lan0
+</file>
+==== NetworkManager interfering with rename ====
+Both methods seen above seem to work, unfortunately on my XFCE environment, the **NetworkManager** stepped into the play, reverting back the name:
+<file>
+NetworkManager[581]: <info>  [1620916630.3558] device (eth0):
+   interface index 10 renamed iface from 'eth0' to 'enx00e04c885302'
+</file>
+If you want to **manage the interface using NetworkManager** from the user session, be sure that the interface is not referred by **/etc/network/interfaces** or any snippet file into ''/etc/network/interfaces.d/''. If the interface is configured by ''/etc/network/interfaces'', NetworkManger will ignore it, labelling as //unmanaged//.
+==== Use the old naming schema (eth0, ...) ====
+If you want to use the old naming schema (eth0, eth1, ...) enable the kernel override option in **/etc/default/grub**:
+<file>
+GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0"
+</file>
+Followed by **update-grub** and **reboot**.
+Beware that by using that schema the card's assigned name depends upon the time when the kernel discover the interfaces, in some cases you may find the names swapped after a reboot, even if the Ethernet cards are fixed built-in.
 ===== How it worked in the old days of Debian 4 Etch =====
@@ Line 70: / Line 119: @@
 SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="00:18:e7:22:0b:f7", NAME="eth1"
 </file>
+:!: **ATTENZIONE**: Pare che **il file con le regole udev viene ignorato** se manca l'opzione **net.ifnames=0** nella cmdline del kernel! Questo almeno è accaduto con Debian 11.7 e kernel 5.10.0-23-amd64.
+:!: **ATTENZIONE**: Il file con le regole udev viene ignorato comunque in **Debian 11**.
 ===== Debian 9 Network Interface Naming =====