doc:appunti:hardware:xiaomi_yi
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
doc:appunti:hardware:xiaomi_yi [2019/03/07 23:31] – [Model Z23 vs Z25] niccolo | doc:appunti:hardware:xiaomi_yi [2021/04/12 12:17] – [Battery duration] niccolo | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== Action | + | ====== Action |
{{.: | {{.: | ||
+ | |||
+ | ===== Technical Specs ===== | ||
+ | |||
+ | ^ Specs ^^ | ||
+ | ^ Size | 60.4 x 42 x 21.2 mm | | ||
+ | ^ Weight | ||
+ | ^ Image Processor | ||
+ | ^ Image Sensor | ||
+ | ^ Lens | 155ᵒ ultra wide angle glass lens | | ||
+ | ^ Aperture | ||
+ | ^ Battery | ||
+ | ^ Storage | ||
+ | ^ Video Format | ||
+ | ^ Format | ||
+ | ^ Profile | ||
+ | ^ GOP | M=1, N=8 | | ||
+ | ^ FPS | 29.970 (30000/ | ||
+ | ^ Size | 1920 x 1080 pixels | ||
+ | ^ Bit rate | 12.0 Mb/s (Variable) | ||
+ | ^ Video Size ^^ | ||
+ | ^ 1 sec | ||
+ | ^ 1 min | ||
+ | ^ 1 hour | 5.09 Gb | | ||
===== Problema di formattazione microSD ===== | ===== Problema di formattazione microSD ===== | ||
Line 24: | Line 47: | ||
fsck.vfat -v -n /dev/sdc1 | fsck.vfat -v -n /dev/sdc1 | ||
</ | </ | ||
+ | |||
===== Problema WiFi non funzionante ===== | ===== Problema WiFi non funzionante ===== | ||
Line 45: | Line 69: | ||
* Premere nuovamente il pulsante WiFi, il LED lampeggia velocemente alcune volte e poi si spenge. | * Premere nuovamente il pulsante WiFi, il LED lampeggia velocemente alcune volte e poi si spenge. | ||
- | ===== Formato Video ===== | + | ===== Filesystem VFAT e timestamp |
- | ^ Format | + | La telecamera formatta la scheda microSD con un **filesystem VFAT**, per definizione i **timestamp** su tale filesystem sono in **localtime**. |
- | ^ Profile | + | |
- | ^ GOP | M=1, N=8 | | + | Se si monta la microSD su un sistema GNU/Linux è possibile utilizzare il parametro di montaggio **tz=UTC**, in tal modo i timestamp vengono considerati in UTC e opportunamente convertiti in localtime. In alternativa esiste il parametro **time_offset**. |
- | ^ FPS | 29.970 (30000/1001) | + | |
- | ^ Size | + | FIXME: Cosa fare di preciso per avere i timestamp corretti? La telecamera dove prende l'ora? Dal telefono? Se ci troviamo all' |
- | ^ Bit rate | + | |
+ | * [[https:// | ||
+ | * [[https:// | ||
+ | |||
+ | ===== Battery on Model Z23L vs Z25L ===== | ||
+ | |||
+ | I purchased a second camera after some months, it turned out that the new model, which serial number is starting with **Z25L**, is a bit different from the older one, with serial number starting with **Z23L**: | ||
+ | |||
+ | {{.: | ||
+ | |||
+ | {{.: | ||
+ | |||
+ | As you can see, the bottom of the camera is changed a little: the **alignment notch** is not longer present. But the most important change is in the **battery cover**. The new cover is reinforced with a metal plate and its thickness is decreased by 1 mm, this means that the **the battery depth is increased by 1 mm**! | ||
+ | |||
+ | ^ Cam Model ^ Battery Model ^ Battery Size ^ Current Rating | ||
+ | | Z23L | AZ13-1 | 36.5 x 32.5 x 8 mm | 1010 mAh | | ||
+ | | Z25L | AZ13-2 | ||
+ | |||
+ | {{.: | ||
+ | {{.: | ||
+ | |||
+ | This means that a new battery **does not fit** into an older camera, instead an old battery **requires a thickness of 1 mm** to stay into the new camera. The only change in sizes are about **battery** and **battery cover**, it seems that sizes of the camera body is unchanged. | ||
+ | |||
+ | ===== Battery duration ===== | ||
+ | |||
+ | I tested some batteries for duration in video recording. Some baterries are rather old, some are brand new. The video is automatically split approximately every **1.9 Gb**, using high quality video this means about 22 minutes. | ||
+ | |||
+ | During the test I experienced some unexpected stops in recording: the camera emitted a beep followed by three short beeps (FIXME check actually) then stopped recording. The camera remained on, the battery was not empty (the ring LED was still blue) and SD card had plenty of space. No overheat was evident: room temperature was about 19 °C and camera body was cold. I just pressed the video button again to start another recording. May be some glitches into the SD card? It was a Samsung 32 EVO MicroSD HC I, UHS Speed Class 1. | ||
+ | |||
+ | ^ Battery Brand ^ Service Status | ||
+ | | Yi original 1010 mA | Used, 5 years old | 70 min | | ||
+ | | Kingma 1010 mA | Used, 5 years old | 64 min | | ||
+ | | MTB 890 mA | Brand new | 89 min | | ||
+ | |||
+ | |||
+ | ===== Lens Distortion Correction ===== | ||
+ | |||
+ | The Yi camera features an **ultra-wide angle lens**, capable of an **angle of view of 155°**. However this leads to a strong image distortion at the edges of the frame. You can enable the **Lens Distortion Correction** into the camera settings, this will stretch the image, reducing the angle of view and thus loosing a portion at the edges, but it will correct the aspect of the image, reducing the **barrel effect**. The correction is performed by software, this means that a smaller portion of the native image captured by the sensor will be enlarged to became a full resolution image, effectively **creating missing | ||
+ | |||
+ | In the following images you can se the difference between **LDC** (Lens Distortion Correction) option set to **OFF** and **ON**. The third image shows roughly how much of the frame is lost when LDC is on. | ||
+ | |||
+ | {{.: | ||
+ | {{.: | ||
+ | |||
+ | {{.: | ||
+ | |||
+ | ===== Time-lapse ===== | ||
+ | |||
+ | For **long duration time-lapse**, | ||
+ | |||
+ | To start a time-lapse video you need the Android app. From the main screen select the **video icon**, then **Timelapse**. Tapping the **INT/LEN** label you can select the **interval** between each frame (from 0.5 to 60 seconds) and the **video length** (from 6 to 120 minutes, or off for manual stop). Once you made the settings, you can disconnect the app and turn off the camera WiFi. Start the time-lapse using the **shot button**. The **camera remains in time-lapse mode** untill you turn it off. | ||
+ | |||
+ | Do not confuse the **video time-lapse** mode with the **photo time-lapse** mode. From the main screen, **Settings** (gear icon) => **Device Settings** => **Default Photo Mode** you can set the default photo mode: | ||
+ | |||
+ | ^ Photo Modes ^^ | ||
+ | ^ Photo | Standard single shot mode. | | ||
+ | ^ Timer | Shot is taken after an initial wait of 3, 5, 10 or 15 seconds. | ||
+ | ^ Burst | A short burst of poses is taken, you can choose 3p/s, 5p/s, 7p/s or 7p/ | ||
+ | ^ Timelapse | The interval between shots can be set to 0.5, 1, 2, 5, 10, 30 or 60 seconds. | ||
+ | |||
+ | The photo time-lapse start when you press the shot button; press it again to stop the sequence. The **single photos** are saved, a video is not created. | ||
- | ^ Video Size ^^ | + | ===== The Android App ===== |
- | ^ 1 secondo | + | |
- | ^ 1 minuto | + | |
- | ^ 1 ora | 5.09 Gb | | + | |
- | ===== Model Z23 vs Z25 ===== | + | We installed the Android application **[[https:// |
- | I purchased a second camera after some months, it turned out that the new model, which serial number is starting | + | To date (April 2021) the YI Action app is not longer hosted on the Google Play, may be due the dispute |
- | {{.: | + | As reported by several users, if you have trouble connecting to the Yi camera WiFi, try to **disable data connecton**, |
- | {{.: | + | ===== Firmware ===== |
- | As you can see, the bottom of the camera is changed a little: the alignment socket is not longer present. But the most important change is in the battery cover. The new model is reinforced with a metal plate and it is thick 1 mm less. This means that also **the battery size is changed**! | + | * Model Z23L factory firmare 1.2.13 |
+ | * Model Z25L factory firmare | ||
- | ==== Battery Size ==== | + | Use the SD card to update the firmware version by placing " |
- | * Model Z23 battery size: 36.5 x 32.5 x 8 mm | + | ===== Web References ===== |
- | * Model Z25 battery size: 36.5 x 32.5 x 9 mm | + | |
- | This means that a new battery does not fit into an older camera, instead an old battery | + | * [[https:// |
+ | * [[https:// | ||
+ | * **{{.: | ||
+ | * **[[https:// |
doc/appunti/hardware/xiaomi_yi.txt · Last modified: 2022/05/12 19:58 by niccolo