Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:raspberrypi_nas_networking [2021/04/02 15:09] – [Transfer rate] niccolo
+++ doc:appunti:hardware:raspberrypi_nas_networking [2021/04/02 15:19] (current) – [Hard disk performance] niccolo
@@ Line 26: / Line 26: @@
 ===== Hard disk performance =====
-^ Interface  ^  Mb/s ^
+To measure the hard disk **read performance** we copied a large file of about **3 Gb** into **/dev/null**, this is the result timing:
-| USB 2      |  31.8 |
-| USB 3.0    |  |
+^ Interface  ^   Mb/s ^
+| USB 2      |   31.8 |
+| USB 3.0    |  184.8 |
+If you are interested in transferring large files across the network, beware that a **100 Mbit LAN** imposes a limit of **14.7 Mb per second**, so the **USB 2** interface is enough to sustain that. But if you are interested into **Gigabit Ethernet** performance offered by the **Raspberry Pi 4**, you definitely need to use the **USB 3.0** interface.