rigacci.org

User Tools

Site Tools

Trace:
doc:appunti:hardware:raspberrypi_nas_kodi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
doc:appunti:hardware:raspberrypi_nas_kodi [2022/05/28 18:25] – [RaspiOS 11 Bullseye] niccolodoc:appunti:hardware:raspberrypi_nas_kodi [2022/08/10 09:44] – [RaspiOS 11 Bullseye] niccolo
Line 31: Line 31:
  
 Check for other unnecessary configuration options in **[[https://www.raspberrypi.com/documentation/computers/config_txt.html|/boot/config.txt]]**, like **start_x=1** needed on the Pi 3 to play VP6, VP8, Theora and alike encoded files. Kernel options added into **/boot/cmdline.txt** may be obsolete too, e.g. the **elevator=deadline** was suggested as an alternative to the //cfq// scheduler when minimizing I/O latency is more important than maximizing I/O throughput, but it does not exist in recent Linux kernels in Bullseye. Check for other unnecessary configuration options in **[[https://www.raspberrypi.com/documentation/computers/config_txt.html|/boot/config.txt]]**, like **start_x=1** needed on the Pi 3 to play VP6, VP8, Theora and alike encoded files. Kernel options added into **/boot/cmdline.txt** may be obsolete too, e.g. the **elevator=deadline** was suggested as an alternative to the //cfq// scheduler when minimizing I/O latency is more important than maximizing I/O throughput, but it does not exist in recent Linux kernels in Bullseye.
 +
 +==== Swap file ====
 +
 +==== Web References ====
  
   * **[[https://forums.raspberrypi.com/viewtopic.php?t=323303|Kodi on Bullseye RPiOS]]**   * **[[https://forums.raspberrypi.com/viewtopic.php?t=323303|Kodi on Bullseye RPiOS]]**
doc/appunti/hardware/raspberrypi_nas_kodi.txt · Last modified: 2023/06/10 17:24 by niccolo