Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:raspberrypi_car [2019/02/01 16:48] – [Dongle USB Edimax] niccolo
+++ doc:appunti:hardware:raspberrypi_car [2019/02/01 17:04] (current) – niccolo
@@ Line 1: / Line 1: @@
 ====== Raspberry Pi Car Device ======
-Riferimenti web:
+===== Dongle USB Edimax in Mode Master (Access Point) =====
-  * [[http://blog.sip2serve.com/post/48420162196/howto-setup-rtl8188cus-on-rpi-as-an-access-point|Howto setup rtl8188cus on rpi as an access point]]
+Normalmente l'interfaccia WiFi lavora in modalità //managed//, cioè come cliente di un //Access Point//. Si vuole invece configurare il Raspberry come Access Point, cioè far lavorare l'interfaccia WiFi in Master Mode. Non tutte le combinazioni di **hardware** + **modulo kernel** + **software hostapd** supportano tale modalità.
-  * [[http://dl.dropbox.com/u/1663660/hostapd/hostapd|hostapd custom]]
-  * [[http://www.geeked.info/raspberry-pi-add-multiple-wifi-access-points/|WPA Managed in Roaming]]
-===== Dongle USB Edimax =====
   * [[http://elinux.org/RPI-Wireless-Hotspot|RPI Wireless Hotspot]]
@@ Line 23: / Line 19: @@
   * **[[https://docs.google.com/document/d/16hJS7fnPyKUwbvR33_nMku_b6XcYaBJXVpeCIMoJzcQ/pub|Convert a Raspberry Pi B2 standalone Wifi-AP using REALTEK chipset (e.g. EDIMAX)]]**
   * **[[https://www.raspberrypi.org/forums/viewtopic.php?t=61816|RTL8188EUS cannot setup access point]]**
+Altri riferimenti web:
+  * [[http://blog.sip2serve.com/post/48420162196/howto-setup-rtl8188cus-on-rpi-as-an-access-point|Howto setup rtl8188cus on rpi as an access point]]
+  * [[http://dl.dropbox.com/u/1663660/hostapd/hostapd|hostapd custom]]
+  * [[http://www.geeked.info/raspberry-pi-add-multiple-wifi-access-points/|WPA Managed in Roaming]]
 ===== wpa_supplicant =====