Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:mxq_s805 [2017/08/23 12:02] – [Video Resulution] niccolo
+++ doc:appunti:hardware:mxq_s805 [2020/01/27 12:01] (current) – [Which LibreELEC image to use?] niccolo
@@ Line 11: / Line 11: @@
 ^ CPU                    | ARMv7 revision 1       | ARMv7 revision 1            |
 ^ Machine                | Amlogic Meson8B        | Amlogic Meson8B             |
-^ Total RAM memory       | 510 Mib (345 Mb total free with LibreELEC).\\ The original Linux kernel **gives fake values**: 824 Mb with ''/proc/meminfo'' or 1926 Mb with ''free''   | 1022 MiB                    |
+^ Total RAM memory       | **510 Mib** (345 Mb total free with LibreELEC).\\ The original Linux kernel **gives fake values**: 824 Mb with ''/proc/meminfo'' or 1926 Mb with ''free''   | **1022 MiB**  |
 ^ NAND Storage           | 8GiB                   | 8 GiB                       |
 ^ WiFi driver            | RTL871X: rtl8189es     | RTL871X: rtl8189es          |RTL871X: rtl8189es
 ^ Remote factory_code    | 0x40400001 {{.:mxq:mxq-remote.0x40400001.conf.txt|remote.conf}}  | 0xfe010001 {{.:mxq:mxq-remote.0xfe010001.conf.txt|remote.conf}}  |
 ^ Recovery mode          | Yes, toothpick method  | Only from external SD card  |
-^ [[http://kszaq.libreelec.tv/s805|Kszaq LibreELEC]]  | LibreELEC-S805.arm-8.2-8.1.5a-m201d.img  | LibreELEC-S805.arm-8.2-8.1.5-HD18Q.img  |
+^ [[http://kszaq.libreelec.tv/s805|Kszaq LibreELEC]]  | LibreELEC-S805.m201d.arm-7.0.3.3d.img  | LibreELEC-S805.arm-8.2-8.1.5-HD18Q.img  |
 ^ Note                   | Time from the internet sometimes does not work.  | Overscan problem: image borders drop out of the screen.  |
@@ Line 153: / Line 153: @@
 From [[http://kszaq.libreelec.tv/s805/]] you can find several images to flash to the device, you have to experiment which one is the best fit for you. Putting the wrong image onto the SD card, results in boot freeze at MXQ logo, just remove the SD card and reboot to recover.
-  - **HD18Q** for all black MXQ box ant OTT ones.
+  - **HD18Q** for all black MXQ box and OTT ones.
   - **MXQ** for all black and Beelink MXQ with "red stripe" on a corner.
   - **m201d** for boxes with 512 Mb RAM (instead of 1 Gb).
@@ Line 197: / Line 197: @@
 </code>
-==== Solved and Unsolved Problems ====
+==== Problems (Solved and Unsolved) ====
 === LibreELEC-S805.arm-8.2-8.1.5a-m201d ===
@@ Line 217: / Line 217: @@
 </file>
-May be there are problems with NAND memory? FIXME Must investigate running the same releas from SD card and/or running a different release from NAND.
+The problem seem to be fixed **downgrading** to LibreELEC-S805.m201d.arm-7.0.3.3d image. Some kernel problem? Was the image 8.2-8.1.5a corrupt on flashing? Quién sabe?
 === LibreELEC-S805.arm-8.2-8.1.5-HD18Q ===