Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:jumper_ezbook_s3 [2018/07/31 12:47] – [How To Make the WiFi Working] niccolo
+++ doc:appunti:hardware:jumper_ezbook_s3 [2018/08/01 09:31] (current) – [How To Make the WiFi Working] niccolo
@@ Line 34: / Line 34: @@
 ===== How To Make the WiFi Working =====
-The integrated WiFi card is attached to the USB bus, it is identified by ID **obda:b720**.
+The integrated **WiFi card** is attached to the **USB bus**, it is identified by ID **obda:b720**.
 The WiFi did not work with the stock installation. The **scanning** for available access points **is indeed working**, but **associating fails**. After the failed association, even the scanning stops working. We upgraded the kernel to **linux-image-4.17.0-1-amd64** in the hope that this will fix the WiFi problem, but nope.
-We downloaded the sources of a kernel module (developed by **lwfinger**) which expressly states the compatibility with that device. This is the source code **[[https://github.com/lwfinger/rtl8723bu|GitHub page]]**.
+We downloaded the sources of a kernel module (developed by **lwfinger**) which expressly states the compatibility with that device obda:b720. This is the source code **[[https://github.com/lwfinger/rtl8723bu|GitHub page]]**.
 <code>
@@ Line 45: / Line 45: @@
 git clone https://github.com/lwfinger/rtl8723bu.git
 cd rtl8723bu
-# In Makefile: commented-out from the line EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
+# In Makefile: commented-out the line EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
 make
 make install
@@ Line 71: / Line 71: @@
 </code>
-An automatic workaround seems to be creating a file **/usr/lib/systemd/system-sleep/fix_internet.sh** with:
+An automatic workaround seems to be creating an executable file **/lib/systemd/system-sleep/fix-wifi** with:
 <code bash>
@@ Line 84: / Line 84: @@
 esac
 </code>
+===== Suspend and Hibernate =====
+Tried with success the command line version of the commands:
+<code>
+systemctl suspend
+systemctl hibernate
+</code>
+The hibernate requires a swap partition equal or greather than the available RAM.
 ===== TODO =====
   * How to prevent the notebook to go into stand-by mode, which make it unreachable from the network (e.g. ssh login).
   * Bluetooth not working?
-  * How to hibernate instead of stand-by?
+  * FIXME **Enter** key misbehaving in **less**. Problem: e.g. man page, backslash to search, hit Enter does not work, it prints **ESCOM** string instad. Workaround: use **Ctrl-M**. Tips: ''xev'' says that Enter sends ''KP_Enter'' instead of ''Return'', but changing keysym with ''%%xmodmap -e "keysym KP_Enter = Return"%%'' does not resolve. Use ''.lesskey'' to modifiy?